Custom storage cabinets rail and stile work

With the oak out of the kiln, and others jobs settled down, Im now able to start work on the rails and stiles for the storage cabinets.  After running the rough oak through the planer, cutting for lengths, and going through the edge joiner, Ive set up the band saw to make some simple standard cuts.  1/4" cut on all sides will make a nice tenon.  I alchoices cut the tenons first, and then cut the mortises to match each tenon.
Over on the table saw, Ive trimmed the excess off the ends, and end up with my 1/4" tenon. Mortise work comes next.

Related Posts by Categories